Friday, October 18, 2013

We Grew TWO Loaves of Bread!

On Saturday, October 12th we finally baked the bread that we started making on April 20th. It took us 176 days to make the field, plant the wheat, harvest it, thresh, winnow, mill it into flour, and then bake it into two loaves just in time for Canadian Thanksgiving!
Ready to make our Bread!
We chose a whole-wheat quick bread recipe from Jean Pare's "Company's Coming: Muffins & More" recipe book. The recipe is on page 110, and is called "WHOLE WHEAT BREAD". It was a simple recipe, and looked like it would work for us, so off we went!
Following Jean Pare's Instructions EXACTLY!
We carefully mixed our dry ingredients using all of our "shorts" and our flour. We kept the bran out of the bread, and we will put it in some cookies later. All of the flour and shorts together gave us about 7 cups of flour to work with, so we had enough for two loaves, plus a bit left over!
Almost ready to put the first loaf in the oven!
Mixing by hand was a bit tough, so we all took turns. Then we poured our batter/dough into a pan that we lined with parchment paper. The paper makes the loaf really easy to remove once it is baked.
We put the pan in the oven at 350 F for 40 minutes, and while it was baking we got our second loaf ready!
And just like that, LOAF ONE WAS DONE!!!
After we repeated the whole process one more time LOAF TWO WAS THROUGH!
All there was left to do was let it cool (a bit) and then finally try our bread, right from our own back yard! Well, the sugar, molasses, baking powder, baking soda, vinegar, milk and oil weren't from our yard, but the flour was! Thanks to all of those people that made all of those other ingredients too, whoever you are!
The bread tasted really good. It was sweet, not too heavy, and almost like a muffin. We will make this recipe again, even if we do NOT grow our own wheat to make the bread! The next morning we had some of our own bread toasted for breakfast.
Breakfast time!
For Thanksgiving, we went to Amma and Grandpa's house, which is about a two hour drive from our place. We took our bread along to be part of the Thanksgiving meal, and all of us enjoyed it. We have so much to be thankful for, and now we also know how thankful we can be for the bread that we buy in stores. Can you imagine if we all had to make our own bread?
From our own Back Yard to the Thanksgiving Table
Along the way we learned that you can grow two loaves of bread from a 4x8 field of wheat, so one loaf could be grown on a 4x4 plot, if the yield was good. Use a hard wheat. We did not fertilize or water our crop, so doing either will likely improve the yield. Milling is tricky. You could do it yourself, but getting help on a project is always ok too, and you might make some new friends (thanks again, Cigi!). One of the loaves has been eaten, and the other one frozen. We will eat it on special occasions between now and Christmas. Thank-you to all of you who have followed the blog!

And that is all we know so far.

Tuesday, October 1, 2013

Our Wheat is Now Our Flour: Thanks CIGI!

We had a few choices about how we would turn our wheat into flour. We knew that we might be able to use a Vitamix machine (thanks for the offer, Mrs. Becker), or we could use a coffee grinder, or we could mill it with a couple of used grindstones from an old Bosch Food Processor that we bought on Kijiji.

In the end, we didn't do any of those things. Instead, we made some new friends at the Canadian International Grains Institute, which is located in down town Winnipeg. Ashok and his colleagues kindly offered us their time and their expertise as wheat scientists to help us with our project. Thanks Cigi! Here is a link to find out more about Cigi:

Making New Friends at the Cigi Pilot Mill (A Science Lab for making flour!)
But our milling story started a little before we got to Cigi. First of all, we finished up the drying, and decided to weigh our wheat.
Drying is much Wheat do we have?
After careful measuring, it turns out that our 4x8 field of wheat produced 908 grams, or exactly 2lbs of wheat. In the Spring we planted 207 grams of wheat, but we know that we over-did it. Even with the over seeding, our harvest of 908 grams means that we got close to 4.4 grams of wheat for ever gram we planted. Experts tell us that we did ok for just starting out!
We were careful to weigh the container separately as well, so that we knew the correct weight of the wheat.

Now we had to figure out milling. We learned about Cigi after doing a Google search for milling options in Winnipeg (where we live). Since they had a Twitter account, We Tweeted out to them to see if they could help us in some way:

After a few days and a phone call or two we took the wheat downtown to the Canadian Grain Commission Building on Main Street. Then we went up to the 10th Floor, and then to the Pilot Mill on the 11th Floor.

The Canadian Grain Commission Building
Here we the Cigi Office!
And the Pilot Mill on the 11th Floor (Like a super secret wheat lab!)
What happened in the Pilot Mill? Well, we have flour now, and we know how we got it. The good people at Cigi helped us by milling it into flour, bran and "shorts", which are the left-overs that are not flour or bran. They kept our wheat overnight and prepared it by "tempering" it. More about that process will follow in a blog post soon to come.
The Pilot Mill (the smaller one) is behind me, and I have flour!
So our wheat is now flour, and we are starting to figure out what recipe would be the best for our bread. We plan to add the "shorts" to the flour and bake them into the bread, but we have not decided on a recipe yet. In the end, we have 688 grams of flour, 190 grams of bran, and 65 grams of shorts. Cigi also kept a 20 gram sample of our harvest so they can do some further testing to tell us a bit more about our wheat. Thanks Cigi! It was good to make some new friends!
Back at home with our flour, bran, and "shorts"
So we got some help with the milling and made a few new friends. This was a fun part of the project! Now we will have to figure out our recipe. Canadian Thanksgiving is around the corner!

And that is all we know so far.